After Dark Fashions Australia

Product Categories

Additional Information Required for US Custom Made Boots On boot shaft size there are a few things to remember.  Firstly, loose or sagging boots look terrible.  You do however need to take into account what you will be wearing the boots with.  If you plan to wear them on bare legs with a skirt the shaft will need to be marginally smaller than if your plan to wear them over trousers or jeans.  Secondly, boots that are tight look great when you first put them on but quickly get ripples in them as they work down your leg while you are walking.  They can also be very difficult and uncomfortable to bend your knee in while sitting.  For boots to look good your leg needs a small amount of room in the boot such that it will slide up and down on your leg as you walk and sit. Depending on the height of the boot, we may require that you take from 1 to 10 measurements to allow us to complete your order.  If an appropriate measuring tape is not available, you may use a piece of string and then lay it onto a rigid ruler to read the measurement.  Note that all 10 measurements are to be taken barefooted with heel flat on a hard floor.  If possible get a second person to help take your measurements.  Note that custom making boots cost an additional $140 AUD (approx $70 USD) on top of the standard boot price. Please note that our policy on custom boots is that they are NOT returnable if they do not fit due to incorrect measuring or size selection on your part.  By ordering a custom pair of boots you agree to be bound by this policy. All our boots are made to a medium "C" width fitting.  What is your name? E-mail address? Delivery country? Are you requesting a quote or providing additional details for an order? Quote only Details for order Choose What product code are you interested in? What size are you ordering (Note: ladies high heel size NOT running shoes)? What fitting standard is your size in? American Australian United Kingdom Choose My measurements are in? cm inches     1. Measure from base of heel to just above your ankle bone and note in the box to the right   2. Measure the circumference at this height making sure not to over tighten tape or string over skin and note in the box to the right   3. Measure from base of heel to thickest point on your calf and note in the box to the right   4. Measure the circumference at this height making sure not to over tighten tape or string over skin and note in the box to the right   5. Measure from base of heel to where your knee bends and note in the box to the right   6. Measure the circumference at this height making sure not to over tighten tape or string over skin and note in the box to the right   7. Measure the circumference of the thigh at 24 inches (60 cm) above the heel of the foot and note in the box to the right   8. Measure from base of heel to highest point on your leg that you wish the boot to come and note in the box to the right.   9. Measure the circumference at this height making sure not to over tighten tape or string over skin and note in the box to the right   10. Measure from base of heel to height you wish the belt loops to come.  Generally this is the height of your navel.  (Note this is for chap boots only)   If you feel that you may need to provide us with any other information or wish to ask a question please type it in the box to the right   Click Submit Form box to email your details to us.  This process does not order any items, it simply sends us the additional details for your custom order.  Boots must be ordered from within the product catalogues.  Please note that our policy on custom boots is that they are NOT returnable if they do not fit due to incorrect measuring or size selection on your part.  If you decide to order a custom pair of boots you agree to be bound by this policy.